Licensing plans for every team.

Choose a license tier for Virtua Composites CAE-CAM, billed monthly or annually, or select a role-based offer tailored to your position in the composites workflow.

30-day evaluationTry Virtua Composites software for 30 days. Only pay if you’re satisfied.

Role-based plans

Focused toolsets built around a single job in the composites workflow. Pricing will be announced soon.

Filament Winding Planning Engineer

Plans winding patterns, mandrel kinematics and payout-eye motion for pressure vessels, tubes and shafts.

Pricing to be announced

AFP Winding Planning Engineer

Tape path planning for in-contact fiber placement process, for COPV, pipes and cones.

Pricing to be announced

Automated Fiber & Tape Placement Planning Engineer

Plans AFP and ATL layup strategies, course generation, robot toolpaths and collision-free program output.

Pricing to be announced

Designer for Manufacturing

Evaluates manufacturing-induced effects on the part: fiber angle deviations, thickness build-up and as-built laminate properties.

Pricing to be announced

Composites Forming Engineer (Hand Layup Laminator)

Prepares drapability and forming studies and ply-by-ply layup guidance for manual lamination.

Pricing to be announced

Feature matrix by role

Software features (release 0.9.13) by role. Project management, toolbar and command palette are included in every role.

Feature Filament Winding Planning Engineer AFP Winding Planning Engineer Automated Fiber & Tape Placement Planning Engineer Designer for Manufacturing Composites Forming Engineer (Hand Layup Laminator)
1. Mold
3D deposition modeEnables the full 3D workflow (mold surface, layup surface meshing, mold solid, global rosette). When off, only EOP contour import is available.
Mold surface importImports the mold (layup) surface from STEP or STL. For a STEP file, the user picks one of its shapes. The mesh quality is analysed.
Mold geometry importImports a mold solid from STEP or STL for collision checks.
Surface meshing and remeshingRuns the mesh analysis (minimum face area and edge length). Remeshes the surface with MMG (Hausdorff distance, gradation) and optional hole filling. Undo is available.
Geometry placementOffset and roll/pitch/yaw of the mold or mold geometry, applied about the laminate origin.
Rosette and guide curvesSets the global rosette X axis, which is the 0° fiber reference. Imports guide curves from STEP or IGES so the fiber direction follows the curve tangent.
EOP contoursImports the EEOP and MEOP contours from a STEP file, matched by name. The MEOP can be computed as the bounding square of the plies.
Frame, display and up directionUp direction of the model (saved with the project), grid Z offset, mold opacity, laminate frame size, and visibility of the mold geometry and EOP contours.
2. Filament Winding
Mandrel definitionAxisymmetric mandrel profile, created or edited in a dedicated panel, or imported from a text file of Z radius points.
Laminate importImports a laminate XML file. Lists its plies and generates all tapes at once, with a progress bar.
Layer definitionLayer type (Helix, Hoop, Connector) and helix type (Geodesic, Target Radius, multi-section helix).
Helix sectionsSplits the mandrel profile into sections where the meridian tangent changes sign, one section per ramp (automatic mode). Computes the helix sections.
Circuit start and endStart angle and positions, start location (center, head stock or tail stock), end position, and symmetric winding.
Turnaround and frictionFriction budget (slippage), turnaround length and its calculation method, reverse optimal solve from friction, and end-angle target.
Doily layerTrims helix paths back to the start and end positions, for reinforcement.
Profile update and thicknessRecomputes the profile for each layer from the build-up beneath. Thickness model: Wang analytical (fast) or from core samplings (accurate).
Repeat patternComputes the repeat pattern of the ply: number of circuits, skip index and angle, dwell angle, deviation and coverage.
Tapes displayShows or hides the tapes, with rewind, play and forward controls to step through them. Removes all tapes.
ExportExports the path points of the plies to file.
3. AFP (Fiber Placement)
Laminate importImports a laminate from NX FiberSim XML or from CATIA V5 CPD XML.
Ply managementAdds an empty ply, copies a ply (angle, contour, seed point and reference curve, without tapes), removes a ply, and selects the active ply. Shows the laminate table.
Tape parametersPly angle, tape width, tape gap, boundary overlap (fraction of tape allowed past the ply boundary), minimum tape length, and spiral propagation (one continuous offset spiral for a guide curve that winds around the mold).
Ply contour importImports the ply contour from STEP or IGES. Selects a closed wire and sets it as exterior or interior (hole).
Reference curveSets the seed point on the mold surface (picked in 3D or typed), builds the guide curve from it, and applies it to plies of the same angle. A reference curve can also be imported.
Tape generationGenerates the tapes of the active ply or of the whole laminate, from the contour and reference curve.
Advanced tapes generationOpens a panel with two modes. Automatic: sectorizes the ply into parallel multi-tow courses within engineering limits (max fiber deviation, min steering radius, symmetry, optimized geodesic paths, best effort). Manual: adds tapes one at a time with a chosen centerline type (parallel, geodesic, fixed angle), with live limit checks.
Tape editingAdjusts the length of a selected course, hides or shows the tapes, and removes all tapes.
DisplayDisplays all plies, explode view along Z, contour as ribbon, and odd or even tape coloring.
ExportExports the ply data as a PlyBook (DXF) or as tape geometry (STEP). Options: orientation, format, scale, and origin at the part mounting position.
Tape analysis (AFP and Winding)
Analyze tapesColors the tape mesh by the chosen quantity.
Analysis typesShearing angle, steering radius, thickness and fiber deviation.
Gap/lap between adjacent coursesGap and lap analysis between adjacent courses.
Colorbar range and limitCustom limit for the colors, and the range they span (ply values or a preset). Optional smoothed gradient.
Roller compactionCompaction quantity: pressure (max or mean) or radial deformation. Fast geometric model, or physics-based roller contact model (checkbox in the analysis panel).
4. Kinematics
Robot model importImports a robot model as a compressed URDF (XML and STL meshes).
Robot setup selectionSelects a robot cell from the assets folder and loads it. Synchronize reloads the cell data from its URDF, overriding the project values.
Part geometryImports a part as STEP or STL for display and collision. Lists and removes the geometries.
Deposition headEdit head settings panel: number of tows, roller (diameter, length, internal diameter, hardness, compaction analysis settings: load, analysis step, sampling), heating device (infrared lamp or laser, power, laser geometry, optical model).
Cell mounting pointOrigin and roll/pitch/yaw of the workobject, and grid offset.
Home positionsSelects a home position and resets the robot to it.
Inverse kinematics settingsFast analytical IK solver for a fixed rail axis. Smoothing of rail and joints, singularity avoidance and collision avoidance weights.
Collision detectionEnables the collision check during jogging.
TCP jogMoves the TCP by position and orientation, with a rail value and an optional fixed rail axis. Reset at zeros.
5. Planning
Geometric discretizationMinimum distance between path points and the kink angle that keeps a point as a target.
Approach and retractDocking path (surface arc-length or straight tangent), docking, approach, cut and retract distances, end rolling distance.
Floating tabPre-feeds a floating tab of material before the tape: its start offset along the tape, and its height.
Process speedsLayup speed, optimized layup speed (speed law from steering radius), approach speed and linkpath speed.
Winding planningPath type (Wound: non-contact filament winding, or AFP: in-contact), envelope type (cylindrical, elliptical or from file), time mode, radial and axial offsets, free-fiber length, and the cross-carriage and yaw axes.
Toolpath computationComputes the full toolpath, or the toolpath of a selected ply. Deletes the toolpath.
Layup strategyLayup direction (forward, backward or alternate), reversed tape order, and course order optimization to minimize travel time.
Planning strategies tableDisplays the planning strategy of each ply.
Toolpath reviewReplays the toolpath with a slider. Shows or hides targets, the toolpath, the envelope, and target labels. Can show the first course only and the process events (material feed and cut).
6. Simulation
InputsSelects the robot, the toolpath and the home position.
Part mounting offsetsOffset origin and roll/pitch/yaw of the part frame relative to the cell.
Rail and positioner strategyRail axis strategy (constant offset, fixed position, optimized). Use of the rotational positioner, with strategies Fixed, Mobile, and Fixed during layup. Carry angle over plies, and continuous positioner axis.
Joint limitsReduced software joint limits used by the IK and the limit checks, set by a percentage.
Program modeProduction mode chains plies without returning to home. Option to stop at the first simulation error.
Compute simulationComputes the reachability of each target and emulates the robot motion along the toolpath. Stop button and progress bar.
Collision analysisChecks collisions and near-misses during the program: check step time, clearance distance, stop at the first collision, and a collision list.
Results reviewReviews the targets of a ply by course status and target number, with the target status shown in 3D.
Deposition analysisAnalyses the deposition rate and exports a CSV report.
TCP trace and replayDisplays the TCP trace. A replay timeline with speed factor and program time. Tape selection.
LinkpathPath between two courses: linear joint move, or cone (geodesic on a cone around the part Z axis).
Reset robot positionReturns the robot to its reset position.
7. Program
Program formatRobot program format: ABB and KUKA are implemented. SIEMENS and XML are listed but not implemented yet. Formats from custom post-processors are added to the list.
Custom post-processorsReloads the scripts in the post_processors folder. Loads a trusted local Python post-processor for the current session only.
Program generationGenerates the program for a selected ply. Option to generate for ABB RobotStudio (includes a main procedure). Preview of the generated program.
Program headerCustom header text of the program, with reset to default.
RoutinesNames of the tape feed and tape cut routines. Option to generate the routines file (PLC_Comms.mod for ABB, PLC_Comms.src for KUKA).
ExportExports the generated program to a chosen path.
8. Options
AI AssistantOpens a chat panel (AI Agent) and a Documents panel (upload, select and remove documents for the assistant).
FEA ExportExport fiber directions and thicknesses for Finite Element Analysis commercial software (Abaqus, Ansys).